LR-Cal Kalibriergeräte / Calibration Equipment von / from DRUCK & TEMPERATUR Leitenberger - GERMANY

Pneumatic Pressure Comparison PumpLR-Cal LPP 60-T Kalibrier-Testpumpe (pneumatisch, bis 60 bar)
Pressure Test Pump

Model LR-Cal LPP 60-T

  • Pneumatic (operated with ambient air)
  • Making pressure up to +60 bar (870 psi)
  • Making vacuum down to -0,95 bar (-28 inHg)
  • Bench type
  • Very easy operation, fine volume adjustment

Description

Description Pressure Comparator LR-Cal LPP 60-T

Kalibrier-Handtestpumpe LR-Cal LPP 60-T mit Referenzdruckmessgerät LR-Cal TLDMMThe pressure test pump LR-Cal LPP 60-T is used to generate pressures and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument under test and a sufficiently accurate reference measuring instrument (e.g. electronic pressure calibrator LR-Cal LPC 300 or LR-Cal  LPC 200, accuracy ±0.025% FS) are connected to the  LR-Cal LPP 60-T, the same pressure pressure resp. vacuum is applied to the two instruments when the pump is operated.

Despite its compact dimensions, the pneumatic pressure comparator LR-Cal LPP 60-T is easy to operate and allows for exact generation of the required test pressures. A change-over switch enables the generation of vacuum as well. The LR-Cal LPP 60-T is fitted with a fine adjustment valve for the precise adjustment of pressures. The reference instrument is screwed directly on to the top of the pump and the unit under test is connected by means of a connection tube incorporating an adapter 1/4" BSP rotating female (optional 1/4" NPT female) port.

Included in standard supply:

  • Pressure comparator / pressure test pump LR-Cal LPP 60-T
    with pressure port for reference instrument 1/2" BSP female rotating with O-ring sealing
  • Aluminium base plate
  • Pressure test hose 0.5 m with pressure port 1/4" BSP female rotating for test item
  • Operating manual

Options: see "Accessories"

Specification

Specification Pressure Comparator LR-Cal LPP 60-T

Pressure generation: 0 to 60 bar = 0 to 870 psi, switchable to
Vacuum generation: 0 to -0.95 bar = 0 to -28 inHg
Pressure ports
(standard version):
For reference instrument:
1/2" BSP female, rotating, with integr. O-ring sealing, on the top of the pump.
For test item:
1/4" BSP female, rotating, with integr. O-ring sealing, at the included pressure test hose
Materials: Aluminium, Brass, NBR
Priming pressure: hand lever
High pressure: Volume variator
Pressure fine adjustment: Volume variator (fine graduated pressure adjustment with large volume)
Dimension: approx. 150 x 300 x 215 mm
Weight: approx. 2.55 kg
Order-Code: LPP-60-T

Version with reference pressure port 1/4" BSP female: Order-code LPP-60-T-G14
Version with reference and test pressure ports 1/4" NPT female: Order-code LPP-60-T-N14

Accessories

Accessories for Pressure Comparator LR-Cal LPP 60-T

Order-Code Description Image
LPP-VOLUMEN-TOOL Tool (zum Aufstecken auf den Volumenvariator)
zur noch einfacheren und schnelleren Handhabung
des Volumenvariators (Hochdruckerzeugung,
Druckfeineinstellung)
LPP-VOLUMEN-TOOL für LR-Cal Kalibrier-Handtestpumpen LPP 30, LPP 60 und LPP 60-T
LPP-ADAPTER-BSP Adapter- und Dichtungssatz für Prüflingsanschluss:
BSP-Rohrgewinde G 1/8, G 3/8, G 1/2 und
G 1/2 außen, aus Edelstahl, mit integrierten Dichtungen
Gewindeadaptersatz für LR-Cal Kalibrierhandtestpumpen
LPP-ADAPTER-NPT Adapter- und Dichtungssatz für Prüflingsanschluss:
NPT-Gewinde 1/8", 1/4", 3/8" und 1/2",
aus Edelstahl
 
LPP-ADAPTER-M Adapter- und Dichtungssatz für Prüflingsanschluss:
Metrische Gewinde M12x1,5 und M20x1,5
aus Edelstahl, mit integrierten Dichtungen
Metrischer Gewindeadaptersatz für pneumatische LR-Cal Kalibrier-Handtestpumpen, inkl. MINIMESS-Adapter
LPP-WARTUNG Wartungssatz (Dichtscheiben, O-Ringe, Schrauben, usw.)  
LPP-SCHLAUCH ERSATZTEIL: Prüflingsanschlussschlauch 0,5 m
komplett mit Verschraubungen und Prüflingsanschluss
G 1/4 innen, freilaufend, mit integriertem Dichtring
 Ersatzteil: Prüflingsanschlussschlauch für LR-Cal Kalibrier-Handtestpumpen LPP 30, LPP 60 und LPP 60-T

DOWNLOADs

Datasheet and Manual for Pressure Test Pump (bench) LR-Cal LPP 60-T

Note:
Datasheet and Manual can be downloaded as PDF files. To open PDF files, you need the ADOBE READER. You can get this software free of charge from ADOBE.

Page Top
Page Bottom

Bitte wählen Sie Ihre Sprache:

LR-Cal Leitenberger Kalibriersysteme
is a trade mark of
DRUCK & TEMPERATUR
Leitenberger GmbH

for calibration equipment
Pressure & Temperature.

190x190-lpp60-tldmm
190x190-lcc200
190x190-lhm-kraft
190x190-lhm
190x190-messe1
190x190-lsp-tessnow
190x190-fertigung-1
190x190-lpc300
190x190-lpp40
190x190-pulsar
190x190-lpp08
190x190-lpp08-koffer
190x190-fluid200
190x190-ldw-hk
190x190-llc100anschluss
190x190-tldmm
190x190-gebaeude33
190x190-fluid-detail
190x190-lsp
190x190-pyros650
190x190-lcc100
190x190-lpc300-finger
190x190-lhm-drehmoment
190px-ldw-p
190x190-lpp60t-tldmm
190x190-lfc80-atc-detail
190x190-llc100
190x190-lfc80
190x190-lpp1000
190x190-lpp60
190x190-lsp1200
190x190-lfc80-atc
190x190-gebaeude32
190x190-messe2
190x190-lpp700
190x190-lsp1000bm-lpc200
190x190-lppkit
190x190-lpp60-koffer
190px-ldw-h
190x190-fertigung-2
190x190-ldm80