Pressure comparison pumps are used for generating pressure for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparison measurements. These pressure tests can be carried out in laboratories, workshops or on site at the set measuring point.
When the device under test and a reference measuring instrument with an adequate accuracy are connected to the test pump, the same pressure will act on both measuring instruments after actuating the pump. A calibration or an adjustment can be carried out by comparing the two measured values at any pressure value.
In order to enable an accurate generation of the measuring points, the pressure comparison pump LR-Cal LSP 1600-BM is provided with a fine adjustable spindle pump. In addition, the LR-Cal LSP 1600-BM feature a spindle which only runs withing the pump body. Thus there is no adverse bending moment acting on an outstanding spindle, and particularly for field use this has the advantage that the dimension of these pressure comparison pumps will not change when the spindle is turned during operation. The LR-Cal LSP 1600-BM needs only little force to generate also high pressures.
|Medium||hydraulic fluids on mineral oil base|
|Pressure ports||2 x 1/2" BSP female rotating, with O-ring|
|Swept volume per revolution||[cm³]||approx. 3,9 (each turn about 0.1)|
|Needed force||[Nm]||at 250 bar: 2.0; at 500 bar: 4.0; at 1000 bar: 8.0|
|Materials||Brass, stainless steel, aluminium, FKM, NBR|
|Distance between pressure ports||[mm]||300|
|Dimension||[mm]||400 x 375 x 265 (withour star handles)|
|Housing||Robust metal housing with adjustable feet|
|BLINDSTOPFEN-G12-MS||Blind plug 1/2" BSP male made in brass
To close both pressure ports, 2 pcs. are needed
|CPB5000-R-SET||Spare set O-rings for pressure ports
(5 pcs. 4 x 2.2 and 5 pcs. 8 x 2)
|CPB5000-ADS||Set of threaded adapters for unit under test connection, in small plastic case
1/4" BSP, 3/8" BSP, 1/2" NPT and M20x1.5
inkl. Schlüssel SW 32
|CPB5000-WA90||90° angled adapter 1/2" BSP male, to be used for units under test with back connection|
|CPB5000-FLUID||Hydraulic fluid on mineral oil base, bottle with 1 l|