LR-Cal Kalibriergeräte / Calibration Equipment von / from DRUCK & TEMPERATUR Leitenberger - GERMANY

LR-Cal LPP 700 Kalibrier-Handtestpumpe, hydraulisch, Druckerzeugung bis 700 barPressure Test Pump
for pressure calibration purposes

Model LR-Cal LPP 700

  • Hydraulic (operated with oil or water)
  • Pressure generation up to +700 bar (10150 psi)
  • Portable
  • Simple and easy operation

Description

Description pressure test pump LR-Cal LPP 700

The pressure test pump LR-Cal  LPP 700 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.

If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal  LPP 700 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.

Despite its compact dimensions, the pressure test pump LR-Cal  LPP 700 is easy to operate and allows for exact generation of the required test pressures The LR-Cal  LPP 700 is fitted with a fine adjustment valve for a precise adjustment of pressures.

The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.

Standard scope of delivery:

  • Pressure test pump LR-Cal LPP 700
    with reference instrument pressure port 1/2" BSP female (freely rotating), with integr. O-ring (no tools needed to replace reference instrument), on the top of the pump
    with test item pressure port 1/4" BSP female (freely rotating), with integr. O-ring (no tools needed to replace test item) at the test hose of the pump
  • Test hose 1 m ("MINIMESS 1620")
  • Manual

Options: see "Accessories"

Specification

Specification pressure test pump LR-Cal LPP 700

Pressure generation: 0 to 700 bar = 0 to 10,152 psi
Pressure ports
(standard version):
For reference instrument (on the top of the pump):
1/2" BSP female (freely rotating), with integr. O-ring
For test item (at the test hose):
1/4" BSP female (freely rotating), with integr. O-ring
This connection is made via an adapter, at the pump is a MINIMESS 1620 port.
Materials: Aluminium, brass, ABS, Plexiglas, NBR
Priming pressure: Hand lever
High pressure: Switch-over knob, reduced lever stroke
Pressure fine adjustment: Fine volume adjuster (with large volume)
Operating media: Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
Fluid reservoir: Volume > 200 cm³, can be filled during stroking
Dimensions: approx. 270 x 160 x 120 mm (without test hose)
Weight: approx. 1.3 kg (without test hose)
Order-Code: LPP-700

Accessories

Accessories for pressure test pump LR-Cal LPP 700

Order-Code Description Image
LPP-H-KOFFER Transit case with custom foams with space for
pressure test pump, sets of adapters and
1 reference instrument max. DS 100 resp. 85x85 mm
Koffer für hydraulische Kalibrier-Handtestpumpen LR-Cal LPP 700 und LR-Cal LPP 1000
LPP-ADAPTER-BSP Set of stainless steel BSP adapters, with integr. O-rings
(no tools required to change test item):
1/8" BSP, 3/8" BSP, 1/2" BSP female + 1/2" BSP male
Gewindeadaptersatz für LR-Cal Kalibrierhandtestpumpen
LPP-ADAPTER-NPT Set of stainless steel NPT adapters
1/8" NPT, 1/4" NPT, 3/8" NPT and 1/2" NPT male
 
LPP-ADAPTER-M Set of stainless steel "metric" adapters, with integr. O-rings
(no tools required to change test item):
M12 x 1.5 and M20 x 1.5,
and MINIMESS 1620 adapter
Metrischer Gewindeadaptersatz für pneumatische LR-Cal Kalibrier-Handtestpumpen, inkl. MINIMESS-Adapter
LPP-H-WARTUNG Maintenance / Service Kit (gaskets, O-rings, seals, ...) Wartungssatz für hydraulische Kalibrier-Handtestpumpen LR-Cal LPP 700 und LR-Cal LPP 1000
MMS-M16X2-1-0 SPARE PART: test hose 1.0 m
System"MINIMESS 1620"
Prüflingsanschlussschlauch
MMS-M16X2-2-0 Test hose 2.0 m
System "MINIMESS 1620"
MMS-M16X2-3-2 Test hose 3.2 m
System "MINIMESS 1620"
MMS-M16X2-4-0 Test hose 4.0 m
System "MINIMESS 1620"
SMK-M16X2-G14A SPARE PART: adapter 1/4" BSP female
for above test hoses (test item side)
System "MINIMESS 1620"
 
MSV-G14-M16X2 SPARE PART: adapter 1/4" BSP male
for above test hoses (pump side)
System "MINIMESS 1620"
 

DOWNLOADs

Datasheet and Manual for Pressure Test Pump LR-Cal LPP 700

Note:
Datasheet and Manual can be downloaded as PDF files. To open PDF files, you need the ADOBE READER. You can get this software free of charge from ADOBE.

Please refer also to: LPP-KIT Pressure Calibration KITs

Page Top
Page Bottom

Bitte wählen Sie Ihre Sprache:

LR-Cal Leitenberger Kalibriersysteme
is a trade mark of
DRUCK & TEMPERATUR
Leitenberger GmbH

for calibration equipment
Pressure & Temperature.

190x190-lhm-drehmoment
190x190-fertigung-2
190x190-fluid200
190x190-lpp60-koffer
190x190-lpc300-finger
190x190-messe2
190px-ldw-h
190x190-lfc80-atc
190x190-lcc200
190x190-fluid-detail
190x190-lpp60-tldmm
190x190-lhm
190x190-gebaeude32
190x190-messe1
190x190-llc100
190x190-tldmm
190x190-lpp08
190x190-lsp-tessnow
190x190-lpp08-koffer
190x190-lsp1000bm-lpc200
190x190-lfc80
190x190-lpp60t-tldmm
190x190-gebaeude33
190x190-lcc100
190x190-lpp40
190x190-lsp
190x190-lsp1200
190x190-lpc300
190x190-lfc80-atc-detail
190x190-pulsar
190x190-ldw-hk
190x190-lpp1000
190x190-lhm-kraft
190x190-fertigung-1
190x190-lppkit
190x190-ldm80
190x190-llc100anschluss
190x190-lpp60
190px-ldw-p
190x190-lpp700
190x190-pyros650