The LR-Cal FLUID 200-H is a portable stirred liquid bath (temperature calibrator). The instrument is suitable for calibrating temperature sensors and thermometers of all sizes, diameters and shapes, without the need of specifically drilled blocks. The calibration baths are perfect for checking and calibration of glass thermometers.
The portable liquid bath LR-Cal FLUID 200-H is available in two versions:
|Temperature indication||Accuracy ±0.15°C
Resolution 0.01°/0.1° (°C or °F)
|Stability of regulated temperature||±0.02°C at 150°C|
|Heating||max. 10°C per minute|
|Cooling||max. 5°C per minute|
|Temperature uniformity||at 150°C:
radial ±0.05°C / axial ±0.05°C
|Calibration liquid||<80°C: water
<125°C: silicone oil 200C5
<220°C: silicone oil 47V100
|Liquid reservoir||54 mm diameter, 150 mm depth|
|Power supply||230 VAC (optional 115 VAC)|
|Power consumption||500 VA|
|Reservoir volume||approx. 400 cm³|
|Weight||approx. 8 kg|
|Dimension||160 x 340 x 330 mm|
|REF-T-SENSOR-PT||External precision reference probe Pt 100
Range -100...+670°C, TK: 0,003850 1/K; Stability <40 mK,
Diameter 6,35 mm, Length 450 mm; Bulb made in Inconel
4-wire connection; incl. 2 m PTFE-cable, isolated and zinn plated
|DKD-T-KAL-PT||for reference probe: DKD-/DAkkS Certificate of Calibration|
|RTAB-T-KAL-PT||for reference probe: calculation of constants|
|RTAB2-T-KAL-PT||alternatively calculation of constants including table of values|
Cooling system (needs external fresh water supply) made in stainless steel, to shorten the cooling time.
|Dry Block Kit
Temperature range -10...+125°C. Block made in aluminium, 60 mm diameter, usable depth 170 mm, stability ±0.04°C, with 9 drillings oder blank
|BB-INSERT-01-FLUID||Black Body Kit
for calibration of non-contact infrared thermometers. With high emission grade. Insert with interal grafit plating. Including precision reference probe Pt 100 (4-wire)
|599.0.000.0003.0||PC-Software LR-Cal AQ2sp
incl. RS232-interface lead
Temperatur sensor calibration:
Automatic calibration routine for all type of temperature sensors with advanced features such reference sensor stabilization, time-calibration data are automatically populated and stored for printing report. This procedure can also be ran in manual mode to allow the operator to manually enter the data. This is particular useful when calibrating temperature device such as digital thermometer or analogue thermometers.
Simply set MAX and MIN value and the software will run an automatic stress test on single sensor or a batch.
Advance thermostat calibration:
Simply set the open and close temperature limits, type of thermostat, typ of test and the software will automatically run the test.
Datasheet and Manual can be downloaded as PDF files. To open PDF files, you need the ADOBE READER. You can get this software free of charge from ADOBE.
Indicated temperature ranges are valid at ambiemt temperature +20°C. The stated accuracy is based on ambient temperature +23°C and is guaranteed for 1 year.
To increase the measurement accuracy of the calibrator significantly, we recommend the -2I version of the temperature calibrator (with two measuring inputs) and the external high accurate reference probe LR-Cal LRT F.
Read this information about calibration fluids...